BSB250 series
HYDRAULIC BLOCK CYLINDERS WITH LONG STROKE
strok > 200 mm
Please refer to the brochure for further details
Hydraulic block cylinders with long stroke is for strokes grater than 200 mm. The housing has a cuboid shape. They are implemented using a tube between the cuboid head and the bottom.
The main area of application fo these block cylinders are mold construction.
Choice of 7different piston sizes and 8 different configurations.
Nominal pressure : 250 bar
Test pressure : 300 bar
Minimum stroke : 201 mm
Maximum stroke : 500 mm
Piston Ø : 25 - 100 mm
BSB250 01
Axial mounting.
Axial through holes, counter sunk on bottom side of cylinder.
Port threads are BSPT.
BSB250 02
Axial mounting.
Axial through holes, counter sunk on rod side of cylinder.
Port threads are BSPT.
BSB250 03
Radial mounting.
Radial through holes by groove side.
Port threads are BSPT.
BSB250 04
Axial mounting.
Axial tapped blind holes on rod side.
Port threads are BSPT.
BSB250 05
Axial mounting.
Axial tapped blind holes on bottom side.
Port threads are BSPT.
BSB250 06
Radial attachment.
Adjusted with 4 threaded blind holes by groove side.
Port threads are BSPT.
BSB250 33
Radial attachment.
Adjusted with through holes and groove.
O-Ring seals on groove side.
BSB250 36
Radial attachment.
Adjusted with 4 threaded blind holes by groove side.
O-Ring seals on groove side.