BSU250 series HYDRAULIC BLOCK CYLINDERS
100mm > stroke ≤ 200mm
Please refer to the brochure for further details
Block cylinders are very compact cylinders with smallest installation dimensions for short stroke operation. By default these cylinders are fabricated with ground and hard-chrome plated rods for the operating conditions.
Ø25 - Ø63 mm piston diameter, stroke > 100 mm
Ø80 - Ø100 mm piston diameter, stroke > 130 mm
Choice of 7 different piston sizes and 12 different configurations.
Mould-making, tool manufacturing, fixture construction;
Nominal pressure : 250 bar
Test pressure : 300 bar
Maximum strok : 200 mm
Piston Ø : 25 - 100 mm
BSU250 01
Axial mounting
Axial through holes, counter sunk on rod side and bottom side of cylinder.
Port threads are BSPT.
BSU250 02
Axial mounting
Axial tapped blind holes on rod side and bottom side.
Port threads are BSPT.
BSU250 03
Radial mounting
Radial through holes.
Port threads are BSPT.
BSU250 04
Radial attachment
Adjusted with 2 threaded blind holes by groove side.
Port threads are BSPT.
BSU250 12
Axial attachment
Attached with 4 longitudinal holes on rod side with head bolts.
O-Ring seals on rod side.
BSU250 14
Axial attachment
Attached with 4 threaded blind holes on rod side.
O-Ring seals on rod side.
BSU250 21
Axial attachment
Attached with 4 longitudinal holes on rod side with head bolts.
O-Ring seals on bottom side.
BSU250 25
Axial attachement
Attached with 4 threaded blind holes on bottom side.
O-Ring seals on bottom side.
BSU250 31
Radial attachment - Block Cylinder with System Port
Adjusted with through holes and groove.
O-Ring seals on groove side.
BSU250 32
Radial attachment - Block Cylinder with System Port
Adjusted with 4 threaded blind holes by groove side.
O-Ring seals on groove side.
BSU250 33
Radial attachment
Adjusted with through holes and groove.
O-Ring seals on groove side.
BSU250 34
Radial attachment
Adjusted with 2 threaded blind holes by groove side.
O-Ring seals on groove side.