top of page
RS250 series
ROUND BLOCK CYLINDER
stroke ≤ 200 mm
Circular block cylinders are very compact cylinders with smallest installation dimensions for short stroke operation.
Piston diameters from Ø16 mm to Ø100 mm, for various standard strokes.
Choice of 8 different piston sizes and 8 different mounting options available.
Mould-making, tool manufacturing, fixture construction
Nominal pressure : 250 bar
Test pressure : 300 bar
Maximum stroke : 200 mm
Piston Ø : 16 - 100 mm
RS250 01
Axial mounting.
Axial through holes, counter sunk on rod side and bottom side for cylinder head bolt DIN 912.
Port threads according to BSPT.
RS250 02
Axial mounting.
Axial tapped blind holes on rod side and bottom side.
Port threads according to BSPT.
RS250 03
Axial mounting.
Axial through holes, counter sunk on bottom side for cylinder head bolt DIN 912.
Port threads at the bottom side according to BSPT.
RS250 04
Axial mounting.
Axial tapped blind holes on rod side.
Port threads at the bottom side according to BSPT.
RS250 05
Axial mounting.
Attached with 6 longitudinal holes on rod side with head bolts according to DIN 912.
Ports are on rod side, O-Ring seals.
RS250 06
Axial mounting.
Attached with 6 threaded blind holes at the bottom side.
Ports are at bottom side, O-Ring seals.
RS250 07
Axial mounting.
Attached with 6 longitudinal holes at bottom side with head bolts according to DIN 912.
Ports are at bottom side, O-Ring seals.
RS250 08
Axial mounting.
Attached with 6 threaded blind holes on rod side.
Ports are at rod side with O-Ring seals.
bottom of page