top of page
BS250 series
HYDRAULIC BLOCK CYLINDERS
stroke ≤ 100 mm
BS250 01
Axial mounting
Axial through holes, counter sunk on rod side and bottom side for cylinder head bolt DIN 912.
Ports: Threads according to BSPT.
BS250 02
Axial mounting
Axial tapped blind holes on rod side and bottom side.
Ports: Threads according to BSPT.
BS250 03
Radial mounting
Radial through holes.
Ports: Threads according to BSPT.
BS250 04
Radial attachment
Adjusted with 2 threaded blind holes by groove side.
Port threads are BSPT.
BS250 12
Axial attachment
Attached with 4 longitudinal holes on rod side with head bolts according to DIN 912.
O-Ring seals on rod side.
BS250 14
Axial attachment
Attached with 4 threaded blind holes on rod side.
O-Ring seals on rod side.
BS250 21
Axial attachment
Attached with 4 longitudinal holes on rod side with head bolts according to DIN 912.
O-Ring seals on bottom side.
BS250 25
Axial attachement
Attached with 4 threaded blind holes on bottom side.
O-Ring seals on bottom side.
BS250 31
Radial attachment - Block Cylinder with System Port
Adjusted with through holes and groove.
O-Ring seals on groove side.
BS250 32
Radial attachment - Block Cylinder with System Port
Adjusted with 4 threaded blind holes by groove side.
O-Ring seals on groove side.
BS250 33
Radial attachment
Adjusted with through holes and groove.
O-Ring seals on groove side.
BS250 34
Radial attachment
Adjusted with 2 threaded blind holes by groove side.
O-Ring seals on groove side.
Anchor 1
bottom of page